Siberian Tiger Hueforge
Print Profile(1)
Description
Really Nice Siberian Tiger Hueforge Print, only uses four colors and can be done without AMS you just have to build pauses in and swap out filaments.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200.36mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Silver
At layer #21 (1.76mm) swap to Jade White for the rest.
Comment & Rating (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
