Simple Cable holders by Industriee

Industriee

Household>Office

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill

Designer

24 min

1 plate

4.0(1)

0.4mm nozzle, 0.16mm layer, optimised quality & 20 minutes

20 min

1 plate

4.8(4)

Boost

Released

Description

Simple Cable holders

Comment & Rating (7)

@Parlo_

Print Profile

0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill

first time it came of the bed during the print, second time slowed down with the silent mode it came out good

@CYULMaker

Boosted

Print Profile

0.4mm nozzle, 0.16mm layer, optimised quality & 20 minutes

Excellent design, profile works fine but why is the part almost at the edge of the plate?

The designer has replied

@RetroSharky

Because it is also optimised for printing on the A1 Mini. It is better if the object is as close to the axis as possible. The position also influences the printing time. Try this: See how the time increases a little, depending on the position. Even the rotation changes the printing time and the quality ...and thanks for the feedback. :)

(Edited)

@user_2215817823

Print Profile

0.4mm nozzle, 0.16mm layer, optimised quality & 20 minutes

druckt sauber, noch nicht getestet

@user_4114268830

Print Profile

0.4mm nozzle, 0.16mm layer, optimised quality & 20 minutes

Very nice, thanks!

(Edited)

@CYULMaker

Boosted

Very nice design. There should be longer versions. Another improvement would be to reduce the end loop to allow for regularly spaced slots when placing two holders next to each other, or to change the shape at the end to create a slot between two holders when placed next to each other.