This is my own work, originally uploaded to Printables.

Note: Print on the narrow side as in my file

A smooth phone/ipad stand. It takes 1 h 12 min to print. No overhang, NO sharp edges, No support, YES YES YES.
More stands with various logo are also included with rose, cube, hearthstone, basketball…

Inspired by https://www.thingiverse.com/thing:1464340 and redesign using Fusion 360 in 2019 June. 

Here, I round all the edges in the redesign that will be safe for my 2 years old son. Most importantly, I design it in a way that the holder can print on the side, so that there is no more overhang issue at all and the beautiful curvature in the design can be achieved nicely in the print.

Please delete the post if stealing models from me