A1 mini handle by ShapeX

ShapeX

3D Printer>3D Printer Accessories

Print Profile(11)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

added a hole that can be accessed with a screwdriver

Designer

1.7 h

1 plate

4.9(1.2 k)

Add support only to the suspended section

Designer

1.6 h

1 plate

4.9(305)

PETG: 0.2mm layer, 6 walls, 15% infill

2.7 h

1 plate

4.8(73)

Slow but Strong, 0.2mm, 6 Walls, 5 Top/Bottom Layers, 45% Gyroid Infill

2.4 h

1 plate

5.0(52)

Click to see more

Open in Bambu Studio

Boost

2582

5616

1910

1.1 k

13.3 k

9.7 k

Released

Description

A1 mini handle makes it easy to move your 3D printer

Remove the cover at the top of the A1 mini Z-axis and replace it with this handle, and secure it with the original screws

a1 mini

handle

Comment & Rating (1910)

@Hasselbraam

This is a great model!I remixed your model in combination with a tangle free dilament guide. Please let me know of your thoughts: https://makerworld.com/en/models/461315#profileId-370029 https://makerworld.com/en/models/115495#profileId-124176 (tangle free filament guide)

@ArthurS

Print Profile

added a hole that can be accessed with a screwdriver

Perfect! Not sure why people are complaining about the cable getting stuck, Just use clips lol

@user122

Do you have any problems while printing with this handle?

@ArthurS

Replying to @user122 :

Nope, have been using it for 3 months now without any issues

@bartschlabs

@ArthurS, do you remember which colour filament you used? It seems to match the colour of the A1 Mini's plastic colour.

@3Dchris

Print Profile

added a hole that can be accessed with a screwdriver

WARNING!!! I had to remove mine after my first tall print. The bowden tube kept getting stuck and causing the side alignment attachment (the thing that the spool feeds into) to pop off, pausing the print with errors. I had previously rated this 5 stars because it printed beautifully and was well designed. However, because of the aforementioned problem I can't recommend that anyone adds this to their A1 Mini. After a 4 hour print, I started having issues because of this handle.

(Edited)

@user_3277446221

same thing happened to me...

@MadCybertist

I was worried about this honestly as I've seen that tube go over the top of the Z axis. I'm glad to see your feedback here thanks for that. I will pass on this print due to this.

@jbogush

Boosted

Printing the appropriate cable/tube clamps and positioning so the cable and PTFE tubing rides clear in front of the Z axis tower is a sensible and easy solution. I did that before a handle because I didn't like the cable and tube even touching the tower.

@TimothySt

Print Profile

added a hole that can be accessed with a screwdriver

Great model! I decided to remix it and place the handle on the other side. I find it makes it a little more stable when lifting :)

@gaosen000

but the cable will be stucked on the handle, be careful

@Nnboylhj

In order to ensure the strength, a 100% fill rate was used, and the model worked very well. Thanks for the model, very useful.

@alexiscool575

Boosted

infill doesn't effect strength walls do

@Bobson_Dougnut

Replying to @alexiscool575 :

Depends on the load. But in general I would say 100% infill is can take more stress. Especially when you have bending in different directions and angles which will basically make your neutral fibre disappear.

@alexiscool575

Boosted

Replying to @Bobson_Dougnut :

look at cnc kitchens video on infill and walls ect

@SemGreys

Boosted

okay, hear me out... Adding a hole for screwdriver not only genius comfortsude, BUT ALSO IT IS BEST WAY TO FIX an issue with external spool when they got tangle due movement of head from top to bottom position, JUST plug ptfe tube into that hole and not only you can HANDLE the printer but aldo HANDLE tangling issue! 10/10 need to print 2 rabbits with one buckshot

@julian2016

what filament ?

@SemGreys

Boosted

Replying to @julian2016 :

BBL PLA matte charcoal

@user_3960843181

Genius!

Show original

@3d.boutique.de

Boosted

Print Profile

PETG: 0.2mm layer, 6 walls, 15% infill

The A1 mini handle is a fantastic addition to your 3D printer. It's incredibly easy to install by simply replacing the top cover on the Z-axis and securing it with the original screws. This handle makes moving your 3D printer a breeze! Bambu Lab PETG Basic

@Pawloske

Print Profile

Add support only to the suspended section

nice design. couldn’t decide which color to use.

@porkac

Print Profile

PETG: 0.2mm layer, 6 walls, 15% infill

perfect !

The designer has replied

@lion7718

Boosted

You print in front of an open window..??

@porkac

Replying to @lion7718 :

@lion7718 window isn't open :)

@4seasons.klima

Print Profile

added a hole that can be accessed with a screwdriver

Very Good!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.