Charge stand to hold the ESR HaloLock Kickstand Wireless Charger (the model this fits is model#: 2C515A you can pick it up on amazon for half the price of the official Apple magsafe charger).

NOTE: I don't know if this fits the ESR charger with the captive cable I only have the 2C515A. I chose the one with the usb-C port as this is more versatile IMO and allows me to choose the cable length for my needs. If you want to test it with your own charger, just print the front piece first to try it out. The charger should sit flush in the front circular piece.

I know technically you don't need a stand for this as it has one built in, but this way I can easily rotate my phone between portrait and landscape.

This prints with no supports if you keep the front facing parts on the print bed. I got away without using a brim, but you may need one (just keep an eye on those first couple of layers). In addition to filament (I used PLA) you will need 4 M3x6mm screws, don't use anything longer as it will damage the front piece. These screw in from the back into the pre-printed holes. In my original design I had the screws in the front but they interfered with the camera as I rotated the phone so had to move them to the rear.

Edit: I've updated this to print as a single piece with no need for screws. Simply slot the holder into the top and align the usb slot with the bottom opening.