Thought I would do something on the cuter side. If you have a request, want FREE *Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D
Instructions
Can be rescaled just remember not to change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Chocolate Transmission Distance: 0.2
PLA Overture White Transmission Distance: 4
PLA Overture Green Transmission Distance: 3.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Chocolate
At layer #17 (1.44mm) swap to White
At layer #25 (2.08mm) swap to Black
At layer #26 (2.16mm) swap to Green
At layer #30 (2.48mm) swap to White for the rest.
Frame in photo found at https://makerworld.com/en/models/217207?from=search#profileId-236230
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.