Description

This design prints with support material and requires NO assembly. Print with the wheels DOWN. 

The low poly camper van model fits as a good table accessory.  

You can also use Bambu lab AMS possibilities to color the print or do it independently with acrylic color. 

Printing settings

As this is my first model, I'm learning how to upload print profiles, etc…. I recommend using the following settings:

Layer high: 0.16-0.2

Infill: 10%

Support: use standard because the bottom part of the car is not made as one plane and there are big flat surface

If there are any problems with the STL model or you see what I can improve, write a comment. Thanks :)