Balatro Joker - Scary Face - Hueforge by Jesse Irwin

Jesse Irwin

Art>Other Art Models

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

46 min

1 plate

5.0(2)

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 67.26x90mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Matte Black Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Scarlet Red
At layer #17 (1.44mm) swap to Jade White for the rest.

Comment & Rating (2)

@akg2n

Print Profile

0.08mm layer, 2 walls, 100% infill

Great print. This one feels a bit thin compared to the others but I guess that's how it goes with some hueforge stuff. Will need to sell my stencil for a better joker soon 🤣