Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 205x205mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smartfil morado Transmission Distance: 1.6
PLA smartfil azul Transmission Distance: 1.8
PLA smatfil amarillo Transmission Distance: 5.8
PLA Default White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with negro
At layer #8 (0.72mm) swap to morado
At layer #14 (1.2mm) swap to azul
At layer #17 (1.44mm) swap to amarillo
At layer #22 (1.84mm) swap to White for the rest.