Magazine Holder (A4 Size) by koland

koland

Household>Office

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 4 walls, 40% infill

Designer

7.8 h

1 plate

4.9(25)

Open in Bambu Studio

Boost

237

550

244

Released

Description

I've been looking for designs but I couldn't find one that's what I wanted so I designed this one instead. 3D printer friendly design, no support needed. Any rigid filament will work.

It's large enough to fit anything A4 size related, including slightly larger files, documents and such.

Comment & Rating (32)

@fc4k7vvzyj

hey - I have printed many and it worked fine. but I don’t know why and I don’t know how… please check if something changed or if you can fix it The print ALWAYS fails because the printer does print the mini spaces between the circles first - means it has to print many many very small pigments which always results in bad bed adhesion and brutal filament waste because the print fails because of stability PLS FIX I tried everything

The designer has replied

@koland

It sounds like a generic adhesion issue, This model (or any model that is long rectangle-ish) requires good plate adhesion. 1. make sure that the correct plate is selected and that it is free from grime and skin oil by washing the plate in warm soapy water. 2. If your brand of filament have a high thermal expansion coefficient, you can try pre-heating the chamber using the print bed and lowering the fan speed as well as adding a Brim. 3. Make sure your filament is dry if you are printing in a humid (>40% RH) environment. Hope this helps.

@user_1765953652

Boosted

Very good design and very strong. My wife asked for a holder where she could keep her trivets in the cupboard. I used your magazine holder as the model and just adjusted the 'X', 'Y', and 'Z' dimensions to fit the area. I printed the piece in PLA on an A1. Works great!

@3DP_man

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

Beautiful design. Holds my documents perfectly!

@user_3026924436

very robust compared to anything I've purchased from the store. I just needed to get a pile of papers off of my desk and organized in this was worth the 10-hour overnight print for me. this was probably my third print, using generic PLA in it came out great.

@user_646941323

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

made this for my husband for his vinyl he using for making stickers hope he likes it ty

@user_2684069765

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

Great model!

(Edited)

@say_no_to_poop

I can't upload a remix due to the standard license, but I made this double-wide and printed it with my 0.6 nozzle at 0.36 layer height. Turned out great. Thanks.

@user_3627480183

Boosted

very nice holder! boosted

@WilkyOfAllTrade

Print Profile

0.2mm layer, 4 walls, 40% infill

Simple easy print to organize papers and manuals from Ikea furniture.

@JabbaTheHat

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

Worked quite well with the jade while pla basic. No stringing. With gray, black, and blue I had some interesting artifacts leftover at certain points of the print.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Ring & Fingers sizer

EliasSchoener

497

569

Snail (different sizes)

WunderWerk

234

575

Storm Trooper - Full Size

Nico The Engineer

Cute turtle (different sizes)

WunderWerk

620

1.8 k