Pop & Catch Toys Ice Cream Cone by Sakul

Sakul

Toys & Games>Outdoor Toys

GIF

In Contest

Beach & Pool Essentials

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

3.8 h

2 plates

5.0(11)

A1 Mini 0.2mm layer, 3 walls, 15% infill

Designer

4.6 h

2 plates

5.0(2)

0.4 nozzle,0.2mm layer, 3 walls, 15% infill

4.2 h

2 plates

5.0(2)

Boost

233

366

317

117

Released

Description

🍦Pop & Catch Toys Ice Cream Cone🍦

The Pop and Catch Ice Cream Toys are the perfect pastime activity for a beach days or playing in the garden!

These Pop & Catch launchers are designed to resemble colorful ice cream cones can be used with normal platic balls like a ping pong ball or even with a 3d printed version.

For assembly, put the cage on top and twist, for the launch mechanism you need a rubber band, use a shorter one for more power.

The Flipper is inserted from the side of the cone and clipped into postition, now hook the rubber band in place, there are different options to do this, depending on the length of your rubber band.

Have fun!

Comment & Rating (27)

@meflly

I love this! Below is the PLA and above is the PETG!

The designer has replied

@Sakul

Looks Great!

@xiendra

Print Profile

0.2mm layer, 3 walls, 15% infill

Great model! I found that the small rubber hair ties worked a treat as I could not find any small regular rubber bands. The lip that holds the rubber bands could be a little bigger to use thicker bands but it works as is. Making 5 in different colors for family get together. Thanks so much for the fun! I added an extra band to each in case one breaks, then it's ready to attach and go again. That's why you see a band in the center of the pin in the picture I uploaded.

(Edited)

The designer has replied

@Sakul

Awesome!

@amdonio

Great idea but launch mechanism needs an upgrade. I am trying to find a rubber which fits the lid but I have a hard time …. The lid is too small. als the hinge mechanism is too flimsy and needs a redesign. I love the idea, I love the print except the launch mechanism.

@redfoxbox

Overall, it is a disappointment. It looks nice, but its functionality is very poor. The launcher mechanism is weak no matter how strong a rubber band I use. The rubber band holding pegs are very small and poorly designed, making it a huge challenge to assemble

@whasintone_254

Print Profile

0.4 nozzle,0.2mm layer, 3 walls, 15% infill

good jod my friends, 5 stas!!! follow me

@Thanatos

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1754973947

please make a file for A1 Mini

The designer has replied

@Sakul

Done!

@Myshka2024

Print Profile

0.2mm layer, 3 walls, 15% infill

kids love this, it took me a bit to figure out how to put the rubber band on

@user_1754973947

Print Profile

A1 Mini 0.2mm layer, 3 walls, 15% infill

works great! I made 3 of these for my kids. They love playing with it.

@PhoenixCraft

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Looks great but i cant find a rubber band that works.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.