This is a katana remix. I adjusted the length of the bottom cover so that it can be put on without the use of glue and allows for the eventual replacement of the blade. Wrap the end cap lightly with adhesive tape and press it into the handle. Next, I created a print profile that uses a fuzzy skin on the handle, as well as decorative handle inserts and an emblem on the end of the handle. Before gluing, I recommend heating the inserts and slightly bending them so that they copy the surface of the handle. In the profile, the printing of the blade parts is set to a layer height of 0.1 mm so that the movement of the individual parts of the blade is easy.