Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Printalot Violeta Transmission Distance: 2.8
PLA Printalot Safrano Transmission Distance: 0
PLA Basico Control3D Rojo Transmission Distance: 4
PLA Polyterra dual Glacier blue azul/blanco Transmission Distance: 0.8
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
Start with Violeta
At layer #6 (0.56mm) swap to Safrano
At layer #8 (0.72mm) swap to Rojo
At layer #16 (1.36mm) swap to Glacier blue azul/blanco
At layer #21 (1.76mm) swap to Ice Blue for the rest.