Hueforge Midoriya/ Deku
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
The Model is 200x112.08mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Tough Pine Green Transmission Distance: 1.5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.68mm) swap to Pine Green
At layer #13 (1.00mm) swap to BambuLab Green
At layer #21 (1.64mm) swap to Jade White for the rest.