Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.5 h
1 plate
Boost
9
12
4
5
15
11
Released
Description
Project: tailor.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #13 (1.12mm) swap to Jade White for the rest.
Do not Adjust Z axis it will ruin the print
Comment & Rating (4)
All
Boosted
Print Profile
0.08mm layer, 2 walls, 100% infill
printed perfectly many thanks for sharing
1
Reply
Boosted
Te ha quedado muy wapa
The designer has replied
0
Reply
gracias compi ❤️👍💯
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld