Clip on Label for Hex-Spool
Remixed by
Copyright Claim
Clip on Label for Hex-Spool
Remixed by
Boost
33
70
16
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
11 min
1 plate
Boost
33
70
16
1
114
57
Released
Description
If you already printed the Hex Spools and didnt see the Remix with Labels (https://makerworld.com/de/models/36802#profileId-35070) , this is a clip on Label for the Spools. Also you can now label both sides if you want ;-)
A small Arrow on the Backside indicates the orientation( has to point to the center of the spool).
I printed in PLA and it works great.
Comment & Rating (16)
All
Boosted
This salvaged my hex spool print after realizing that this model didn't have the built-in label plate (I also printed the spool in black, so the clear label wouldn't have been so useful anyway). So big thanks!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Came out perfectly. Thank you :)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The model and print itself is fine, but it should be noted that this will only work with v2.2 of the Bambu Reusable Hex Spool by Brandido02. This will not work with v3.2 as the hex pattern is much larger.
0
Reply
Could you make an adaptation for a different coil please? :)
https://makerworld.com/ru/models/97411#profileId-113212
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Thank you
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
really nice model and print 👍
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld