Volcano shape guide rod highly flexible dust cover
Copyright Claim
Volcano shape guide rod highly flexible dust cover
Boost
66
164
17
GIF
Print Profile(2)
For TPU, 0.2mm layer, 2 walls, 15% infill
Designer
18 min
1 plate
For PETG, 0.2mm layer, 2 walls, 15% infill
Designer
15 min
1 plate
Boost
66
164
17
0
135
57
Released
Description
A simple volcano shaped lid. It's used to keep crumbs from falling into the grooves underneath the guide rod.
It's fan-shaped when it's printed, and you'll need to bend it into a volcano shape so that the crumbs slide off to the side. Its shape will be held after a few enclosure printings.
It's worth mentioning that you don't have to lose any print height compared to other solutions. The structure is highly flexible, Which means that the Z-axis can reach the maximum height, no parts will be damaged, you just need to reinstall the cover afterwards.
Printing with TPU is recommended, PETG also works but please print the PETG optimized version.
Comment & Rating (17)
All
quick, easy print. Printed in TPU and fits well
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
I love the idea. I had rigid covers before, but was always afraid a tall print could break something on the printer. With these the biggest risk is likely having them disappear into the hole.
That said, getting the flexible TPU print to nicely fit around the linear rods required some fiddling. Once in place it does look nice though.
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
👍
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
printed great
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
didnt work in petg, broke instantly
The designer has replied
1
Reply
Thank you for your feedback. I have uploaded a PETG optimized version which is thinner than TPU version.
0
Reply
yes, exactly like what i experienced and broken right when i took it out and started bending. NOT Working
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
Danke sehr hilfreich 😎👌
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
For TPU, 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld