This is 4 color HueForge of Lamborghini Countach from 2022.
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180.01x126.69mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Spectrum Carrot Orange Transmission Distance: 2
PLA Print-me Lemon Drop Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Jade White
At layer #16 (1.36mm) swap to Carrot Orange
At layer #19 (1.6mm) swap to Lemon Drop for the rest.