With these fake patch panel you can easily mark and organize SC cables, when swapping a switch or panel.

They are labeled 1 to 6, 7 to 12, 13 to 18 and 19 to 24.

In case you are working on more than one switch/panel, there are 3 sets labeled X1 to X3 on the side.

There is quite a low tolerance between too tight and too loose.

I uploaded a looser, standard and a tighter version. Try fitment, before printing more than one.

You could also adjust scale in slicer.

My print profiles contain several plates with different combinations of the panels, just choose the build plate to print.

Optional add 4x2mm magnets. As there are different tolerances, you may need a drop of glue.

(aliExpress amazon.de affiliate links)

Let me know, if you need a different versions (eg: ports, labels).

Also see my other network equipment:

• RJ45 dummy Patch-Panel
• LC fiber dummy Patch-Panel
• SC fiber dummy Patch-Panel
• 19" Rack mount helper
• RJ45 Caps
• 19" Rack Cage Nut Tool