genshin Furina Hueforge(芙宁娜多色浮雕照片)
打印设置:
使用100%填充,0.08层高,0.16首层打印
开始打印使用黑色
在#7 (0.64mm)切换成深蓝
在#10(0.88mm)切换成浅蓝
在#13(1.12mm)切换成白色
材料(PLA/PETG)二者即可
PETG JAYO Black Transmission Distance: 0.3
PETG PolyLite Azure Blue Transmission Distance: 3
PETG Kexcelled Lake Blue Transmission Distance: 3.6
PETG JAYO White Transmission Distance: 6
不同的耗材会引入色差
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG PolyLite Azure Blue Transmission Distance: 3
PETG Kexcelled Lake Blue Transmission Distance: 3.6
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Azure Blue
At layer #10 (0.88mm) swap to Lake Blue
At layer #13 (1.12mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.