The Abbey of Saint Galgano was a Cistercian Monastery founded in the valley of the river Merse between the towns of Chiusdino and Monticiano, in the province of Siena, region of Tuscany, Italy. Presently, the roofless walls of the Gothic style 13th-century Abbey church still stand. The Hueforge print is based on a B/W photo of the abbey.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x125mm in size and the Actual Depth is 1.7mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Silver
At layer #15 (1.28mm) swap to Jade White for the rest.