Hey trekkie :)
Have fun with this HueForge Hybrid Model from Star Trek. I create from the initial scene you can see the first time the Enterprise-E in Star Trek First Contact a Picture of the Nebula and build-in a Enterprise-E model.
And now - it's printable for you :)
Note: Please use a dark grey like Sunlu's Grey. During my testprints i tried a lightgrey (like Amazon Basics) for the print and it doesn't looks good.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Cyan Transmission Distance: 6
PLA+ Sunlu Coffee (or chocolate) Transmission Distance: 3
PLA Sunlu Grey Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Cyan
At layer #7 (0.64mm) swap to Coffee
At layer #11 (0.96mm) swap to Grey
At layer #15 (1.28mm) swap to Coffee/Chocolate for the rest.
At layer #18 swap to Grey for Enterprise Model
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.