Star Trek - HueForge Hybrid - Enterprise B in Warp
Star Trek - HueForge Hybrid - Enterprise B in Warp
Print Profile(1)
Description
Have fun with this HueForge Hybrid Model from Star Trek.
You see the Enterprise-B (Excelsior-Class) in Warp.
The Background is from the Warp-Scene from “Star Trek Into Darkness” a little time before the USS Vengeance caught the USS Enterprise.
Note: The Supports are from Borg….. ok ok…. Borg-Like…. please be careful during Support Removal. But i had a lot of test prints and this is the best one way.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x84.2mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Amazon Basics Lightgrey Transmission Distance: 7
PLA BambuLab Basic Cyan Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Lightgrey
At layer #5 (0.48mm) swap to Cyan
At layer #13 (1.12mm) swap to Jade White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
