Articulated Octopus
Articulated Octopus
Print Profile(3)
Description
An articulated Octopus with lightly snapping joints. Just bend them until they hold their position.
Attention: I recommend downloading this project and manage your flushing volume as you prefer if you print this model in multicolor. I also recommend placing additional “Filament purge” objects on the plate if possible to minimize waste. Keep in mind that white needs a lot of flushing to keep it clear on the print.
This model is: PRINT IN PLACE - NO SUPPORTS
Testprints:
P1S with a 0.4mm nozzle printed in single color at 100% size
P1P with a 0.4mm nozzle printed in multicolor at 100% size
A1 Mini with a 0.4mm nozzle printed in multicolor at 80 % size
Model is tested 100% - 80%. Please make sure your buildplate is clean and levelled. Also make sure your filaments are calibrated.
This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission.
If you want to sell your 3D-printed Neopyx3D designs you need a Neopyx3D - Vendor membership via Patreon:
https://www.patreon.com/Neopyx3D
Recommended Main Settings:
Layer height: 0.16
Infill: 15 % Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: No-brim (Brim optional if you have adhesion issues)
Printing Temperature and Cooling: depends on filament
Comment & Rating (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
