Project: shadowheart.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x226.13mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Esun Dark Blue Transmission Distance: 2
PLA Sunlu Purple Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #9 (0.8mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Purple for the rest.