Project: gale.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x201.58mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Sunlu Sky Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #13 (1.12mm) swap to Sky Blue
At layer #20 (1.68mm) swap to White for the rest.