Tiny Planetary Gears Set

Copyright Claim

Tiny Planetary Gears Set

Boost
3
6
0

Print Profile(0)


Add the first print profile to earn points

Boost
3
6
0
0
6
0
Released

Description

Summary

A small planetary gears system with a ratio of 4:1 per stage, as many stages as wanted, small, open enclosure to see the gears, and hardware free.

The gears are designed with a circular pitch of 2.5mm and they are also slightly beveled at the tips of the teeth to avoid the need of cleaning the excess of material from the firsts layers.

The OpenSCAD is not parametric, there's only parameters for clearance (set to 0.2), backslash (set to 0.1), pressure angle (set to 22.5), tolerances between nuts and bolts (set to 0.4) and length of the bolts, sometimes referred as rods. Any other change will not work. 

To play with the OpenSCAD you will need the following libraries:

Public Domain Involute Parameterized Gears by LeemonBaird

thingiverse.com/thing:5505

Poor man's openscad screw library

thingiverse.com/thing:8796

Knurled surface finishing library

thingiverse.com/thing:9095

The libraries have been included in the ZIP file together with STL files for every single part, build plates for complete sets from 1 to 4 stages, just the crank and upgrade kits from 1 stage to 2, 3 or 4.

1 minute video: http://youtu.be/MUH0MGP7AGc

A shorter video (59") featuring a 10 stages set: http://www.youtube.com/watch?v=FyVZ31tLGCU&feature=plcp

More Pics: http://www.flickr.com/photos/aubenc/sets/72157629731990190/

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more