ClearPort - dust remover - clean USB-C / Lightning by lucafeer

lucafeer

Tools>Hand Tools

GIF

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

40 min

1 plate

4.7(85)

6 HEADS ONLY - 0.16mm layer, 2 walls, 15% infill

Designer

8 min

1 plate

4.9(8)

Kit including 5 Heads, 0.16mm layer, 2 walls, 0% infill

37 min

1 plate

4.6(14)

Optimal Profile, 0.16mm layer, 3 walls, 15% infill

28 min

1 plate

5.0(3)

Boost

435

716

145

738

858

Released

Description

ClearPort - dust remover - clean USB-C / Lightning

Important: you must respect the project settings for it to be functional and printable. If you change the settings you may have problems with screwing and inserting the head.
USE: 0.16 mm High Quality @BBL

Less than three weeks ago I purchased my first 3D printer (Bambulab A1 Mini) and I fell in love with this world. After printing a few projects, I decided to learn how to create and print my second 3D object.

ClearPort is a small and simple tool to remove dust or dirt from USB/USB-C and lightning ports on your smartphone/PC...

the tool is designed for comfortable and resistant use, the "cleaning heads" can be reprinted and replaced with the previously ruined or damaged one!

Please leave me a like and feedback to support me :)

My Print Settings (Recommended for you):

Printer used: Bambulab A1 Mini

Filament used: Bambu PLA Basic

Nozzle: 0.4 nozzle

BambuStudio pre-setting used: 0.16 mm Hight Quality @BBL
USE Very important layer height 0.16 mm!

Supports: No

This project is for personal use only. You do not have the right to resell this digital or printed model without my explicit written consent. Please report anyone who misuses this project.

Comment & Rating (145)

@mephisztoe

Just removed a whole lot dust from my good old iPhone 12 Pro Minis' Lightning Port. Worked perfectly! And just for aesthetic reasons, I had to print two sets. ;-)