PUZZLE - R2D2

To make the full gift package, you'll need to print the box lid and bottom linked below.

The Puzzle Box Lid for this puzzle can be found here:
https://makerworld.com/en/models/481432#profileId-393256

The Puzzle Box bottom can be found here:

https://makerworld.com/en/models/446736#profileId-353234

And other puzzle files I have created can be found here:
https://makerworld.com/@CanadianGamer/collections/988102

-----------------------------------

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

-----------------------------------

***IMPORTANT***

In my print profile the files are set up to make the puzzle. If you load my print profile, be careful about adjusting the locations or you may change the puzzle cut. If you download the files, you will need both the STL and the Puzzle Cutter, and you will need to cut the puzzle yourself.

Something that Bambu has done in the last update has made hueforge designs give a floating regions error. You can ignore this error.

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Matte Marine Blue Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Marine Blue
At layer #17 (1.44mm) swap to Silver
At layer #22 (1.84mm) swap to Ivory White for the rest.