PUZZLE - Stitch
PUZZLE - Stitch
Print Profile(1)
Description
PUZZLE - Stitch
The original Hueforge is here
https://makerworld.com/en/models/504264#profileId-419820
The Puzzle Box Lid for this puzzle can be found here:
https://makerworld.com/en/models/506730#profileId-422460
The Puzzle Box bottom can be found here:
https://makerworld.com/en/models/446736#profileId-353234
And other puzzle files I have created can be found here:
https://makerworld.com/@CanadianGamer/collections/988102
-----------------------------------
***IMPORTANT***
In my print profile the files are set up to make the puzzle. If you load my print profile, be careful about adjusting the locations or you may change the puzzle cut. If you download the files, you will need both the STL and the Puzzle Cutter, and you will need to cut the puzzle yourself.
Something that Bambu has done in the last update has made hueforge designs give a floating regions error. You can ignore this error.
In my print profile I have used a height range modifier (HRM), which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
Printing Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Matte Marine Blue
PLA BambuLab Matte Ice Blue
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Marine Blue
At layer #17 (1.44mm) swap to Ice Blue
At layer #21 (1.76mm) swap to Ivory White for the rest.
---------------------------------------------------------------------------------------------------------------------
A Commercial license to sell printed copies is available on my Patreon:
https://www.patreon.com/CanadianGamer3DPrintsEDM
As part of your membership you will also have access to exclusive files available only on Patreon.
---------------------------------------------------------------------------------------------------------------------
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
