I needed a portable and secure way to transport all my Goathead/Schafkopf money, instead of having to lump around plastic bags with money. So i created this. Goathead/Schafkopf is a card game from Bavaria, often played with money.

It holds up to 37.1€ in coins and has an additional ~5mm below the money insert to store more coins or banknotes. I also added a white fabric into the top, so that the coin don't rattle around as much, but this entirely optional, the coins won't fall out at all. The 2 cent coins i use as “Leger” or “Haus” to avoid confusion with other coins (These terms are just part of the Schafkopf game). The gray peg is just to be able to lift up the insert.

I printed my set without supports in 3 different colors of PLA

Additional Material needed

For the tough box you will need 6 M3x20 screws. Nothing else.

Credits and Links

The parametric box i used is from here: https://www.printables.com/model/731210-parametric-tough-box

The SCAD file for the inserts i created is here: https://gist.github.com/markusmo3/768c7a7b3eb3974edc9837c6188558bf

(Somehow i can't upload it to makerworld, the upload always fails…)