这款3D打印鼠标采用了解构主义风格，将鼠标分解为几个零件，以此实现了鼠标掌托的移动，可以适配更多手型，帮助你找到更适合自己的握持手感，还可以通过掌托的左右滑动适配左手握持者使用鼠标。

This 3D printing mouse adopts a deconstructive style, breaking down the mouse into several parts to achieve the movement of the mouse palm rest, which can adapt to more hand shapes and help you find a more suitable grip feel. It can also be used by left-handed holders by sliding the palm rest left and right.

左右滑动掌托，找到合适位置后拧上限位螺丝。

Slide the palm rest left and right, find the appropriate position, and then tighten the upper limit screw.

滑轨设计（Sliding rail design:）：通过顶部螺丝限位固定（Fixed by top screw limit）

此外，我还设计了小工具，方便限位螺丝固定。

注：1、限位螺丝有阻尼感时即可，不要过度拧紧，防止限位螺丝断裂。

2、为设计掌托移动结构并考虑握持舒适性，考虑DPI调节不是高频率操作，该3D鼠标组装完成后不能随意调节DPI,请在掌托安装前用镊子等物品调试DPI，或者拆除掌托后进行调整。

In addition, I also designed small tools to facilitate the fixing of limit screws.

Note: 1、When the limit screw has a sense of damping, it is sufficient. Do not over tighten to prevent the limit screw from breaking.

2、To design the mobile structure of the palm rest and consider grip comfort, and considering that DPI adjustment is not a high-frequency operation, the 3D mouse cannot be adjusted freely after assembly. Please use tweezers or other items to adjust the DPI before installing the palm rest, or adjust it after removing the palm rest.

具体安装步骤请查看下方装配指南。

Please refer to the assembly guide below for specific installation steps.