Halloween Manor (Filament Painting)
Halloween Manor (Filament Painting)
Print Profile(1)
Description
5 Colour ‘filament painting’ model, Halloween Manor
(I recommend the following max speed settings, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6
PLA Bambu PLA Basic Blue Gray Transmission Distance: 3
PLA Bambu PLA Basic Orange Transmission Distance: 8
PLA Bambu PLA Basic Yellow Transmission Distance: 3
PLA Bambu PLA Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #5 (0.56mm) swap to Blue Gray
At layer #7 (0.72mm) swap to Orange
At layer #13 (1.2mm) swap to Yellow
At layer #16 (1.44mm) swap to Jade White for the rest.
I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results
Use the exact numbers in your slicer to match up properly.
The Model is designed to print with 0.4 nozzle.
**If re-scaling model make sure not to alter the Z height of the model**
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
