Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 300x300mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 0.7
PLA+ GST3D BLUE Transmission Distance: 4
PLA+ GST3D Ice Blue Transmission Distance: 34
PLA+ GST3D WHITE Transmission Distance: 9.5
This print uses 4 unique filaments

Swap Instructions:
Start with BLACK
At layer #2 (0.24mm) swap to BLUE
At layer #7 (0.64mm) swap to Ice Blue
At layer #10 (0.88mm) swap to WHITE for the rest.