Follow along with the HueForge Tutorial video and print the model.

Use your own colors or take the source or edited image and use them to make your own version.

These are the directions that I used for printing this model.

Project: Female Superhero Color Aware Tutorial.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 166.48x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Starlight Neptune Transmission Distance: 2.8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Paramount 3D Iron Red Transmission Distance: 2
PLA PolyLite Wine Red Transmission Distance: 1
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.56mm) swap to Starlight Neptune
At layer #16 (0.76mm) swap to Jade White
At layer #21 (0.96mm) swap to Black
At layer #25 (1.12mm) swap to Iron Red
At layer #29 (1.28mm) swap to Wine Red
At layer #31 (1.36mm) swap to Yellow
At layer #32 (1.4mm) swap to Jade White
At layer #38 (1.64mm) swap to Black
At layer #41 (1.76mm) swap to Iron Red
At layer #43 (1.84mm) swap to Orange
At layer #45 (1.92mm) swap to Jade White
At layer #46 (1.96mm) swap to Yellow
At layer #51 (2.16mm) swap to Jade White for the rest.