No need for an AMS, Just change color at layer.
Both STL and Bambu Studio profile is uploaded.
Any of my 200 x 200 Frames can be used. Just glue them together.
As of 2/25/24 my designs are no longer allowed to be sold commercially.
Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA+ IIID Max Teal Transmission Distance: 4.2
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #13 (1.12mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Teal
At layer #15 (1.28mm) swap to Marine Blue
At layer #16 (1.36mm) swap to Ice Blue
At layer #21 (1.76mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.