Wanted to learn more about Hueforge, so heres my first print of Mirko from BNHA.

Here are the settings taken from Hueforge:

Project: mirko cover.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.98x176.4mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

PLA BambuLab Matte Lilac Purple Transmission Distance: 2

PLA BambuLab Matte Latte Brown Transmission Distance: 2

PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:

Start with Charcoal

At layer #8 (0.72mm) swap to Lilac Purple

At layer #18 (1.52mm) swap to Latte Brown

At layer #24 (2mm) swap to Ivory White for the rest.