Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA HueForge Dark Gray 2.3 Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Gray 2.3
At layer #14 (1.2mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White for the rest.