Bambu logo magnet.

The size is 30x30.

Assembles without glue.

Using 6x2mm magnets.

Can also be used for multi-color testing.

You can also enjoy the textured build plate.

(Also included a version without a logo so you can use your own original logo.)

! Important !

Be sure to use a layer height of 0.2mm.

Please make sure to use a 6x2mm magnet. A 6x1.6mm magnet will not work.

Installation

Insert the 6x2mm magnets into the red arrows.

Push it in until you hear a click and complete. (No glue required.)

To remove the magnet, use tweezers to push it out through the hole at the bottom.