The picture was created by Microsoft Designer (AI)

AMS is not needed.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

Filaments Used:
PLA Black (Transmission Distance: 0.6)
PLA Blue Gray or PLA Dark Gray (Transmission Distance: 3)
PLA Latte Brown or PLA Light Gray (Transmission Distance: 2)
PLA White (Transmission Distance: 3.5)
PLA Yellow (Transmission Distance: 5)

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray or Dark Gray
At layer #13 (1.12mm) swap to Latte Brown or Light Gray
At layer #18 (1.52mm) swap to White
At layer #23 (1.92mm) swap to Yellow for the rest.