1. Print the LED bar file in White PLA for the bottom part and Transparent PLA for the top part.
2. Cut a 30cm strip of LED.
3. When the printer pauses, take the LED strip, remove the adhesive strip and stick it on the print. When applied correctly, resume the print.
4. Print the large or small switch file depending on the switch you have.
5. Make the soldering leaving about 10-12 cm of cable between the switch and the LEDs.
6. Mount the switch in the printed file and screw it to the printer frame in the 2 holes present on the frame.
7. With pieces of double-sided tape, stick the LED strip to the printer frame.

Material

• 30cm led strip
• 1 switch
• power supply
• 2 stiffener screws
• double-sided tape