Bambu Lithophane Frame Remix - No Logo + Diffuser Plate Locks Remixed by TheMakerSphere

Remixed by

TheMakerSphere

Household>Decor

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 5 walls, 50% infill

Designer

4.6 h

1 plate

4.9(61)

0.2mm layer, 5 walls, 80% infill

35 min

1 plate

4.9(27)

0.2mm layer, 2 walls, 8% infill

3 h

1 plate

4.8(14)

0.2mm layer, 3 walls, 20% infill

3.6 h

1 plate

5.0(7)

Click to see more

Boost

170

246

135

993

1.1 k

Released

Description

If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀

This is a quick remix of Bambu Lab's Lithophane frame. The only changes made were:

Remove the ‘Bambu Lab’ logo from the top of the frame
Added locks for the diffuser plate so it doesn't slip out

The 3mf file is for PLA. Supports are already enabled and the model has been rotated to face the camera. I used the High Temp plate. Be sure to change the plate type for whatever plate you end up using!

If you are looking to create your own custom lithophane and not sure where to start, check out my 3D Printed Lithophane Lamp guide. The Lotus Lithophane can be downloaded here: https://makerworld.com/en/models/47759

If you like this model and end up printed it, please upload a make and give a rating.

lithophane

lithophanebox

lithophane lithophane

lithopane

lithophane display case

pictureframe

Comment & Rating (135)

@xvolta

Print Profile

0.2mm layer, 2 walls, 8% infill

When I saw all the supports, I thought "I wouldn't have bothered supporting that bridge, but maybe they know something I don't", and started the print as-is before going to bed. Woke up this morning to a spaghetti detection pause, but the actual part was still well adhered to the bed and only had about 20% remaining, so I let it continue. There were some surface artifacts from the fail, and removing the supports SUCKED, but the frame works and looks fine. Next time, no support.

Support Issue

The designer has replied

@xvolta

Now I just need to figure out what caused this print to underextrude on supports, but correctly everywhere else. It almost looks like it used a different flow multiplier on the tree supports, very weird.

@StatusD112

holy**** Did you used my profile? if yes did you do any changes? i have printed many of these out never any problems

(Edited)

@xvolta

Replying to @StatusD112 :

Your profile, Bambu PETG straight out of the bag, using their filament profile. I'd think it was a nozzle clog or extruder issue if the defects weren't *only* in the support material, but you can see even near the base there are issues in the support but nowhere else. I haven't seen anything like it in a decade of printing. I don't blame your profile for this, it's clearly something very weird going on. I may try reprinting with supports turned off since I don't think the model needs it.

(Edited)

@Quan1um

Print Profile

0.2mm layer, 5 walls, 50% infill

Printed great in Hatchbox PLA Wood. Hinge released on build plate. Bambu Support for PLA worked but did leave some residue.

(Edited)

GIF

The designer has replied

@TheMakerSphere

Looks great! I really need to get me some wood filament.

@charlenise18

Print Profile

0.2mm layer, 5 walls, 50% infill

Changed a few print settings but definitely kudos to a great remix! The little tabs hold both the light guide plate and the LED board, no issues with size.

@jonoitz

Print Profile

0.2mm layer, 5 walls, 50% infill

great model, supports came off really easy

@Screech24

Print Profile

0.2mm layer, 2 walls, 8% infill

Printed great in PETG-CF! Great design.

@cjalocha

Print Profile

0.2mm layer, 5 walls, 50% infill

flawless design. love that there's no logo on these, perfect fit for lithos

@Printster

Print Profile

0.2mm layer, 5 walls, 50% infill

Great Print! Thanks for the easy print!

(Edited)

@Studio727

Print Profile

0.2mm layer, 5 walls, 50% infill

I changed infil to 15% cubic and printed with Bambu PLA-CF

@Rick269

Turned out perfect, printed in ABS.

@cliftoce

Print Profile

0.2mm layer, 5 walls, 50% infill

(reposting my comment to a rating) Nice remix. For me, the standard diffuser plate was just slightly too long for the locks to engage. Perhaps the tabs could be shortened by a couple of mm? When I reprinted the diffuser with 148mm length instead of 150mm, it worked great. I also made the original diffuser work but cutting a couple of shallow notches to shorten it right above the locking tabs.