Black Lotus Lithophane for MTG Magic the Gathering

If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀

I created this Black Lotus lithophane by using lithophanemaker. I also wrote an article about creating your own if you are looking for a bit of help: 3D Printed Lithophane Lamp Project.

This is the artwork from the iconic MTG card Black Lotus by Christopher Rush.

Be sure to use a build plate the results in a flat surface (e.g. Smooth PEI/Cool plate) as a textured surface can potentially cause some distortion in the image. The print profile has the Smooth PEI plate selected. Be sure to change it if you're using a different build plate.

I used a 0.2mm nozzle and printed in PLA. Make sure your PLA spools are in the correct order in your AMS (from left to right, cyan-magenta-yellow-white).

If you end up printing this, please share a make and give this a review!