Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 175.01x111.05mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite White Transmission Distance: 5
    PLA PolyLite Red Transmission Distance: 5
    PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
    PLA PolyLite Brown Transmission Distance: 0.8
 

This print uses 4 unique filaments

Swap Instructions:
    Start with White
    At layer #21 (0.96mm) swap to Red
    At layer #32 (1.4mm) swap to White
    At layer #37 (1.6mm) swap to Savannah Yellow
    At layer #47 (2mm) swap to Brown for the rest.