I was inspired by tablet stand by MAP3D here: https://makerworld.com/en/models/206477?from=search#profileId-226643 but wanted more flexibility, a few larger slots, and cable management. Designed in Fusion360 as a fully customizable stand by combining the various stl files in your favorite slicer. In my example I wanted six slots: Lenovo M10 and M11 tablets; Fire 10" tablet; iPad in a thick case; Asus laptop; a place to hold an external drive connected to my desktop. For the M11, I wanted a divider that had a place to hold the tablet pen, so there is a special divider with a 10mm hole and two smaller holes to hold spare stylus tips. I added cable management unde reach sction of a divider wall; I also included sections without CM. I included a tray for an end if you don't want to finish with a wall. I included a completely flat base, as well as a recessed one if you want to add padding to the base. Assemble your parts on the plate. You can stretch the base piece for the widht you need or use multiple base pieces. The CM slots are designed to held the thicker cables from Anker so you should not have any cable issues.