Articulated Axolotl
Copyright Claim
Articulated Axolotl
Boost
325
477
48
Print Profile(4)
0.16mm layer, 2 walls, 15% infill
Designer
5.9 h
1 plate
240% scale. 0.2mm layer, 2 walls, 15% infill
Designer
14 h
1 plate
Axolotl - 0.2mm layer, 2 walls, 15% infill, A1 mini
1.9 h
1 plate
0.2mm layer, 2 walls, 10% cross hatch infill
1.4 h
1 plate
Boost
325
477
48
19
612
369
Released
Description
Articulated Axolotl printed at 120%
i generally use glue with prints and never fail however im aware that some have had legs detach etc.
i suggest adding a brim or using glue if you are worried.
you can also scale up a little. it prints fine all the way up to 240%
Comment & Rating (48)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
I love this model, Very cute and floppy. Prints in Multi color very well.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
perfekt
0
Reply
Print Profile
Axolotl - 0.2mm layer, 2 walls, 15% infill, A1 mini
Printing without problems using PLA silk ERYONE material
(Edited)
0
Reply
Print Profile
240% scale. 0.2mm layer, 2 walls, 15% infill
Printed well with no issues!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Good print, but I had an issue with one of the legs, for which the "ring" didn't print correctly. May be due to the print speed.
(Edited)
0
Reply
Boosted
Print Profile
Axolotl - 0.2mm layer, 2 walls, 15% infill, A1 mini
P1P 4 mm nozzle came out nicely!!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
Axolotl - 0.2mm layer, 2 walls, 15% infill, A1 mini
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld