Bambu A1 MINI Adjustable Camera Holder

Remixed by

Bambu A1 MINI Adjustable Camera Holder

Remixed by
Boost
103
210
53

Print Profile(3)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

A1 Mini print profile
A1 Mini print profile
Designer
37 min
1 plate
4.8(21)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
30 min
1 plate
4.0(3)

Fast & Clean // 0.28mm layer // 2 walls // 15% infill
Fast & Clean // 0.28mm layer // 2 walls // 15% infill
34 min
1 plate

Boost
103
210
53
29
209
156
Released

Description

(A1 VERSION IN MY OTHER MODELS)

During this upgrade, some parts of your printer may be damaged, I am not responsible for any damage caused by incorrect installation or other damage. If your cables appears too short for this mod you should not install it.

This model allows A1 MINI users to adjust camera angle! I remixed well prepared @henlor A1 Mini faceplate model (by adding a mounting hole) with my A1 camera holder

 

INSTRUCTION (It's prepared for A1 version but will work the same with Mini version):

 

Print all 3 models as they are in print profile, camera holder should be printed with supports

 

DURING NEXT OPERATIONS THE PRINTER SHOULD BE TURNED OFF!

 

Remove original faceplace and camera according to BambuLab instruction

 

Push camera into it's new holder, it's supposed to be pretty tight so vibrations won't make any noise

 

Put new faceplate on the X-axis with the cable going through a hole and carefully bend the connector 90 degrees, it'll be easier to connect it.

Push the cable through camera holder hole and connect it.

Push in the camera facing down and rotate it so it locks

Put the back cover and adjust the angle

Comment & Rating (53)

Please fill in your opinion
(0/5000)

Print Profile
A1 Mini print profile
love it perfect addition to the A1 mini they chose a poor location for the camera now if they would only upgrade the processor so it would live stream rather than the horrible 1 frame per second stream. everyone has to add a real web cam just to get a live view
(Edited)
1
Reply
May I ask the third picture, the column on the left side of the A1mini is printed? Is there a link to the model? Thank you
0
Reply
I will look for that model for you. I’m trying to remember how I came across it but it was a few months ago and I liked how it gave me a top mounted AMS without putting all the force on the z axis.. the model has like 10 pieces and took many hours to print but I like the result and makes for a great way to light it all up
0
Reply
search for “A1 mini AMS lite”
0
Reply
Boosted
nice thanks printed and working only the big plate isnt connected on all edges (a1 mini) do you also have a cover for the old camera position
The designer has replied
0
Reply
Boosted
I was going to post about a cover also.
1
Reply
I'm working on the cover, but it's harder than it looks like :D
4
Reply
Looks like someone made one. https://makerworld.com/en/models/478855#profileId-392193
1
Reply
Boosted
Nice, now we need an old cam location cover.
The designer has replied
1
Reply
I'm working on the cover, but it's harder than it looks like :D
3
Reply
Print Profile
A1 Mini print profile
Very good, great model.. Now the new location is better!
0
Reply
Print Profile
A1 Mini print profile
Wonderful print, very useful, now the camera have a sense! Thank you very mutch!
0
Reply
I missed adding the POV image earlier but couldn’t find my original comment. MUCH better!
0
Reply
Print Profile
A1 Mini print profile
Easy print. Installation was a bit fiddly as the camera cable was a bit too short and I had to gently tug at it to get enough length. Completed a couple of hours of printing and no issues so far. Thank you for sharing this neat model!
0
Reply
Fantastic once I got my sausage fingers to plug in the data cable!
0
Reply
Boosted
Print Profile
A1 Mini print profile
Print seems a little weak ?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
ABS
0
Reply