This is a printable storage and dispensing solution for Nintendo Switch game cards that bears a passing resemblance to another famous console from the same company.

There is an internal carousel mechanism which elevates the cards in sequence to make it easy to see and remove whichever one you need.

The carousel holds 15 game cards.

The lid includes a screw down mechanism to ensure that the cards will not fall out if you toss the holder into a backpack for transport.

Printing

Printing is easy! No supports needed. Refer to the included image for suggested print plate layouts. I printer this on a Bambu Lab P1P without any special settings.

Assembly

1. Insert the carousel into the base of the main case.
2. Screw in the carousel support into the threads in the bottom of the case. It should go in without too much effort. Be careful to ensure it is aligned correctly. Screw it in until the bottom of the plate is flush with the bottom of the threads and adjust as desired.
3. Carefully snap in the control panel.
4. Screw the round black screwtop into the lid. Screw it in all the way so that it actually moves freely once attached.
5. Carefully snap the lid onto the hinges. Gently work them one to avoid breaking.
6. All done! To tighten the lid, close the lid and screw the round block screw top into the top of the main case as per the video above.