Aries

Boost
3
3
0

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
7.3 h
1 plate

Boost
3
3
0
0
2
0
Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 200x200mm in size. You may adjust the X and Y but Z must remain as is.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.2mm

 

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 2.5
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments. Substitute as you see fit.

 

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Gray
At layer #20 (1.68mm) swap to Jade White for the rest.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more