Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x240mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 2.6mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA Kexcelled Fluorescent Yellow Transmission Distance: 8
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Red
At layer #22 (1.84mm) swap to Fluorescent Yellow
At layer #24 (2mm) swap to White for the rest.